8 x Video Access, Минск

The Nimbra 8 x Video Access Module provides high-density transport of MPEG encoded (ASI) or uncompressed video services (HD and SD-SDI).

The Nimbra 8 x Video Access Module provides high-density transport of MPEG encoded (ASI) or uncompressed video services (HD and SD-SDI). The high service density makes it particularly attractive for sport events where large numbers of HD and SD streams need to be transfered from arenas to studios or broadcasting centers. In addition, the ASI capabilities makes it ideal for use in video production, post-production and broadcast environments.

The 8 x Video Access Module may be installed in the Nimbra 680 and Nimbra 688 Media Network Backbone switches.

Each of the eight ports can be set for input, output or monitor and for ASI or high-definition or standard-definition SDI, allowing for a wide variety of configurations and a flexible mix of HD, SD and ASI content.

• Multicast support with guaranteed QoS in any fan-out
• Multiplexes up to six HD-SDI streams onto a single 10 Gbps carrier
• Autosensing of all supported protocols
• Both EU and US SDI standards supported
• Combine your video feeds with other IP data services
• Very high bandwidth utilization
• Low jitter, wander and latency
• Inputs tolerate frequency deviations four time higher than standards
• Hot swappable

The video ports on the 8 x Video Access Module are fully compatible with the HD, SD and ASI video interfaces on any of our other Nimbra video access modules.

Plug-in unit for Nimbra 600 series switches
1 interface slot

Interface, common:
Ports
Return loss

8 x BNC, 75 Ohm,
Configurable HD/SD-SDI/ASI, In/Out/Monitor
> 15 dB

Interface, HD-SDI:
Standard
Frequency

SMPTE 292M HD-SDI
SMPTE 348M HD-SDTI
1.485 or 1.485/1.001 Gbps

Interface, SD-SDI:
Standard
Frequency

SMPTE 259M SD-SDI
SMPTE 305M SD-SDTI
270 Mbps

Interface, ASI:
Standard
Frequency

DVB-ASI. CENELEC EN 50083-9
270 Mbps

Mapping:
DTM
ASi TS Bandwidth

ETSI ES 201 803-11
2 - 212 Mbps

Performance management:
Bins
Parameters

ITU-T G.826 based
24h, 15min
ES, SES, BBE, UAS

Maintenance:
Hardware
Firmware
Monitoring
Loopback

Hot-swap
Remote download
Any port can monitor any other port
Far end (Near end through monitoring port)

Environmental conditions:
Operating temperature
(short term)
Storage temperature
Relative humidity

5 to 40 ºC (41 to 104 ºF)
-5 to 55 ºC (23 to 131 ºF)
-40 to 70ºC (-40 to 156 ºF)
10% to 90% (non-condensing)

Power consumption:

< 40W

Regulatory compliance:
Safety
EMC
CE marking
Evironment

UL60950-1; EN60950-1
FCC 15 Class A; EN 300 386
93/68/EE
RoHS directive 2002/95/EC

Management:
Element Management
Network Manegement

Command Line Interface (CLI) and Web GUI
Nimbra Vision™ or 3rd party NMS over SNMP v1/v2c/v3